Flash Stock Firmware on Galaxy S Duos
Here is the procedure on installing stock Rom on Galaxy S Duos.I also tested this on my own.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired.
This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.
This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.
This Guide is a bit risky for beginners and can only be used by advance users who already had an experience on how to tweak android devices firmware.
Image Source:XDA Forums
BEFORE YOU START:
- Do charge your device battery upto 70 – 80% to avoid trouble.
- Take a full backup of your device in an external SD card.
- Don’t forget to enable ‘USB Debugging’ (Navigate to Menu > Settings > Manage Applications > Development > USB Debugging – check box), otherwise your device will be handicapped.
- Install Samsung Galaxy USB Drivers from here.
Odin v3.09
Stock ROM for Galaxy S Duos
Note: You have to download file according to your baseband version of your device. To get the baseband version, navigate to ‘Menu > Settings > About’.
PROCEDURE TO FLASH FIRMWARE:
1. At first, make sure you have installed the drivers correctly by connecting your device.
2.Download the necessary files from the above links.
3. Now, Switch Off your phone completely and start your device into Download Mode by pressing and holding the ‘Volume Down + Home button’ together, and then press the ‘Power button’ till you see the Android Construction logo. Once again press ‘Power Up’ button to confirm.
4. Open “Odin.exe” and connect your phone in download mode itself. If your phone is connected successfully the one of the ID:COM boxes will turn yellow or green in color.
5. Select the files as per below instruction to install Original Stock ROM on Galaxy S Duos. Files are found to be from the extracted folder.
- Click on “PDA” and select file with “CODE” in its name.
- Click on “Phone” and select file with “MODEM” in its name. (Note: Ignore this step if you don’t able to find such file)
- Click on “CSC” and select file with “CSC” in its name. (Note: Ignore this step if you don’t able to find such file)
- Click on “PIT” and select “.pit” file. (Note: Ignore this step if you don’t able to find such file)
6. Please make sure that F. Reset Time and Auto Reboot options are checked on Odin.
7. Now, click on the “Start button” on Odin to start the installation process. Installation will take a few minutes to complete, so please wait for the complete process.
8. Finally, when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your device from the computer.
For any questions comment below.
Written by Anonymous
Satyam Bora Is 18 Years Old Boy Addicted To Blogging And Technology.He Is A Part Time Blogger And Student Of Civil Engineering. This Guy Is Always Here To Help You :)
0 comments:
Post a Comment