Here is the procedure on installing stock Rom on Samsung Galaxy Grand Duos GT-i9082.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desire.
This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.
Image Source:samsung.com
BEFORE YOU START:
1. Install USB Drivers for Samsung Galaxy Grand on your computer.(Link given below)
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The device should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. Verify the model number of the Galaxy Grand Duos GT-I9082 by selecting Settings >> About Phone.
1. Install USB Drivers for Samsung Galaxy Grand on your computer.(Link given below)
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The device should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. Verify the model number of the Galaxy Grand Duos GT-I9082 by selecting Settings >> About Phone.
NECESSARY DOWNLOADS:
1. Odin: Download Here.
2. Samsung Drivers: Download Here.
3. Jelly Bean Firmware: Download Here.
1. Odin: Download Here.
2. Samsung Drivers: Download Here.
3. Jelly Bean Firmware: Download Here.
PROCEDURE TO FLASH JELLYBEAN ON GALAXY GRAND DUOS:
1. Place both the files you’ve downloaded to your Desktop.
2. Unzip files from both the archives over to your Desktop.
3. Double-click on the Odin executable file and it should launch.
4. Click on PDA tab and select the Stock Firmware file you just extracted to your Desktop.
6. It’s important that you leave Repartition box unchecked.
7. Power off your device.
8. Reboot your device into Download mode. To do so, just press and hold the Volume DOWN+Home buttons together.
9. Press the Volume Down button to continue to Download mode.
10. Connect your device to your PC using the USB cable.
11. Hit Start button in the tool and it should begin flashing the firmware.
12. Once the firmware’s been flashed, your device will automatically reboot.
13. You’re back to stock now!
For any questions and suggestions leave a comment below.
Written by Unknown
Satyam Bora Is 18 Years Old Boy Addicted To Blogging And Technology.He Is A Part Time Blogger And Student Of Civil Engineering. This Guy Is Always Here To Help You :)
0 comments:
Post a Comment