Here today , I am going to explain how to repair your bricked phone and update it to official jelly bean 4.1.2.So here is procedure to do that:
Before You Start:
1. Install USB Drivers for Samsung Galaxy Star Pro on your computer. (Or samsung kies)
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer
Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. Verify the model number of the Galaxy Star Pro by selecting Settings >> About Phone.
Necessary Downloads:
Android 4.1.2 Jelly Bean XXUAMK2 Firmware Download here.
Samsung USB Drivers Download here
Procedure To Update Your Device To Jelly Bean 4.2.1:
Image Source:XDA Forums
Before You Start:
1. Install USB Drivers for Samsung Galaxy Star Pro on your computer. (Or samsung kies)
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer
Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. Verify the model number of the Galaxy Star Pro by selecting Settings >> About Phone.
Necessary Downloads:
Android 4.1.2 Jelly Bean XXUAMK2 Firmware Download here.
Samsung USB Drivers Download here
Procedure To Update Your Device To Jelly Bean 4.2.1:
1. First extract the downloaded files on your desktop.
2. Now Reboot your Galaxy Star into Download Mode:
- Turn Off your phone.
- Press and Hold the Volume Down+Home+Power keys all together at the same time for a few seconds.
- Once you see the warning message, then just hit the Volume Up key and you’re done.
3. Next, Run the Odin application on your PC.
4. While in Download Mode, Connect your Galaxy Star to PC via the USB Cable and make sure you’ve successfully installed USB Drivers for your phone on PC.
5.Check that Odin has recognized your device. and the ID:COM port will either turn blue or yellow and you should also see an Added!! in the message section.
6. Also chek that the ‘Auto Reboot‘ and ‘F. Rest Time‘ and rest leave the default Odin settings.
7.Click on the PDA button and browse the Android 4.1.2 Firmware update file.
8. Similar to that select phone,CSC and pit files if availabe.
9.After selecting the correct file (tar.md5) then hit START button and wait.
10. Finally you need to wait for Odin to completely flash the update file. As it completes, Odin will notify you via the PASS!! Message and your Galaxy Star Pro should automatically reboots.
11. If it does not reboot automatically reboot then go to recovery mode and clear cache and wipe data.
That's it you have successfully updated your device to jelly bean 4.2.1 and unbricked your device.
For any queries leave a comment below.
Recommended:
Written by Anonymous
Satyam Bora Is 18 Years Old Boy Addicted To Blogging And Technology.He Is A Part Time Blogger And Student Of Civil Engineering. This Guy Is Always Here To Help You :)
STILL ON 4.1.2
ReplyDeleteI am extremely sorry ibrahim...it was miss spelled...actually it's 4.1.2..
DeleteIs this teh way to root the device??
ReplyDeletehey bro..i followed also procedure for rooting star pro .still no solution..
ReplyDelete