Flash Stock Firmware On Galaxy Y Duos GT s6102

How to flash Samsung Galaxy y Duos

Here is the procedure on installing stock Rom on GT-S6102.I also tested this on my Galaxy y.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired.

This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.

Image Source:Samsung.com

Necessary Downloads:

Stock firmware files  Download Here

Odin flasher for Galaxy Y duos Download Here

Driver – Samsung Drivrs or Samsung Kies  Download Here.

USB cable – use the supplied USB cable of your Galaxy Y. (Odin will not work Mac and Linux OS).

PC or laptop – running on Windows xp or later OS.

Your Phone – Samsung Galaxy Y Duos GT-S6102

Before You Start:

1. Install USB Drivers for Samsung Galaxy Y Duos on your computer. (Or samsung kies)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer 
Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Y duos should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

Procedure To Update Your Device To Jelly Bean 4.2.1: 

1. First extract the downloaded files on your desktop.

2. Now Reboot your device into Download Mode:

- Turn Off your phone.

- Press and Hold the Volume Down+Home+Power keys all together at the same time for a few seconds.

- Once you see the warning message, then just hit the Volume Up key and you’re done.

3. Next, Run the Odin application on your PC.

4. While in Download Mode, Connect your Galaxy y duos to PC via the USB Cable and make sure you’ve successfully installed USB Drivers for your phone on PC.

5.Check that Odin has recognized your device. and the ID:COM port will either turn blue or yellow and you should also see an Added!! in the message section.

6. Also chek that the ‘Auto Reboot‘ and ‘F. Rest Time‘ and rest leave the default Odin settings.

7.Click on the PDA button and browse the Firmware update file.(if available)

8. Similar to that select Phone (modem) ,CSC and pit files if availabe.

9.After selecting the correct file (tar.md5) then hit START button and wait.

10. Finally you need to wait for Odin to completely flash the update file. As it completes, Odin will notify you via the PASS!! Message and your Galaxy y duos should automatically reboot.

11. If it does not reboot automatically reboot then go to recovery (vol. up+power+home)  mode and clear cache and wipe data.

That's it you have succesfully flashed ypor samsung galaxy y duos.For any questions comment below.

Content Worth A Share ?

• Facebook
• Twitter
• Google+
• Pinterest
• StumbleUpon
• Dig
• LinkedIn

Written by Anonymous

Satyam Bora Is 18 Years Old Boy Addicted To Blogging And Technology.He Is A Part Time Blogger And Student Of Civil Engineering. This Guy Is Always Here To Help You :)