Flash Latest Stock Firmware On Samsung Galaxy R I9103

It's good to get your stock firmware back when you want to repair your bricked device, unroot your device, update your device to latest version and many other reasons. Now you are here so that you can flash latest stock firmware for Samsung Galaxy R I9103, here is a complete guide.

Image Source:samsung.com

Before You Start:

1. Install USB Drivers for Samsung Galaxy R on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. Confirm model of the device.

5. Ensure the battery of the device is charged more than 80 percent.

Necessary Downloads:

1. Odin: Download Here.

2. Samsung Drivers: Download Here.

3. Select the firmware for your region from HERE.

Procedure To Flash Stock Firmware On Samsung Galaxy R:

1.  Power off your device.

2.  Press and hold the Volume Down + Home + Power buttons until your device enters Download Mode.

3.  Extract firmware (downloaded from above link) to a folder on your desktop.  You should end up with two files.

 4.  Extract the odin  file you downloaded above to a folder on your desktop.

5.  From the extracted folder, double-click on Odin.exe to run the tool.

6.  Click on PDA button, locate 'firmware'.tar.md5 and click on OK to load it on Odin.

7.  Connect your device to your PC using the usb cable. Odin should now recognize your device and light up the ID:COM field yellow to signify this.  If not, reinstall the drivers and try again.

8.  Make sure that the Re-Partition and Flash Lock are unchecked; this is important as you might brick your device if these options are ticked!

9.  Click on Start.

10. Once passed, you have successfully flashed your galaxy r.

Fixing Bootlap:

In case your device does not boot automatically press Power+Home+Volume Up buttons together and wipe cache & factory reset using volume keys to navigate and home key to select. Reboot your device now.

You have successfully updated your device to stock rom.For any questions leave a comment below.

By: Unknown On 21:51

Continue Reading

How To Flash Stock Firmware/Rom On Samsung Galaxy Note 3 (All Models)

Hello samsung galaxy note 3 users, today I am here with a new flashing guide for your samsung galaxy note 3.You are here to get your stock or original firmware back so that you can repair/unbrick/unroot your device. Without wasting time I am going to show you how you can get your stock rom back.

Image Source: samsung.com

Before You Start:

1. Install USB Drivers for Samsung Galaxy Note 3 on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. Ensure the battery of the device is charged more than 80 percent.

Necessary Downloads:

1. Odin: Download Here.

2. Samsung Drivers: Download Here.

3. Click on model to download firmware:

Galaxy Note 3 SM-N900

Galaxy Note 3 Duos SM-N9002

Galaxy Note 3 LTE SM-N9005

Galaxy Note 3 SM-N9000Q

Galaxy Note 3 SM-N900S

T-Mobile Galaxy Note 3 SM-N900T

Sprint Galaxy Note 3 SM-N900P

AT&T Galaxy Note 3 SM-N900A

Canadian Galaxy Note 3 SM-N900W8

Verizon Galaxy Note 3 SM-N900V

Procedure To Flash The Firmware:

1. Download the appropriate firmware file. If it is packed in a .Zip or .Rar archive, extract it on your computer. All firmware files have .tar.md5 extension.

2. Download and extract/unzip the Odin zip file and launch the .exe file by double-clicking it.Install samsung usb drivers from above link.

3. Boot your Note 3 into download mode by turning it off and pressing & holding Volume Down + Home + Power.

4. Connect the device to computer using USB cable and wait till Odin detects it. A successful connection is indicated by Blue signal at ID:COM and “Added!!”text at the message box on Odin.

5. If you are using Odin3 3.09, click on “AP” button, navigate to the firmware file and select it.

6. Finally, hit the “Start” button and wait till the installation finishes. It might take a few minutes to complete.

7. When the firmware is installed, you will see “PASS!!” message on Odin and your Note 3 will reboot automatically.

Fixing Bootloop:

 In case it does not reboot automatically then press and hold home+power+volume up button and clear cache and wipe data from there, use volume buttons to navigate and home button to select, reboot your device now.

You are great. you have successfully installed stock firmware on your note 3.

Want to root your Galaxy Note 3, Click Here.

By: Unknown On 09:57

Continue Reading

Update Samsung Galaxy Fame GT-S6810 To Jelly Bean 4.1.2 Manually

Now samsung galaxy fame users can update their device to jelly bean 4.1.2.Here is a procedure to update your device to official jelly bean 4.1.2. By updating you also can unroot and unbrick your galaxy fame.

Image Source:Samsung.com

Before You Start:

1. Install USB Drivers for Samsung Galaxy Fame on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

Necessary Downloads:

1. Odin: Download Here.

2. Samsung Drivers: Download Here.

3. Jelly Bean Firmware: Download Here.

Procedure To Update Galaxy Fame To 4.1.2:

1. Download Odin v3.09 from above links

2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files.

3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.

4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.

5. Now, put the Galaxy Fame GT-S6810B in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.

6. Now run Odin3 v3.09.exe.

7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port

8. Click the AP Button, and select that .tar.md5 file that you downloaded. If you are using old Odin then add the file to PDA button.

9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
 Now, hit the START button to begin the flashing process.

10. Once flashing completed, your Galaxy Fame GT-S6810B will restart.

That's it you successfully flashed your device.

For any suggestions and questions, leave a comment below.

By: Unknown On 01:44

Continue Reading

How To Flash Stock Firmware And Unroot Samsung Galaxy S3 I9300 (Easiest Method)

You are lucky enough to have samsung galaxy s3 and you have rooted it or it has been bricked by you and now you want to repair it or unbrick it then you have reached the right place.Don't worry you will get your factory unlocked like samsung S3 I9300 back.So let us start:

Image Source:XDA Forums

Before You Start: 

1. Install USB Drivers for Samsung Galaxy S3 on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy S3 I9300 by selecting Settings >> About Phone.

Necessary Downloads: 

Official Stock Firmware for Galaxy S3 GT-I9300.: Download Here.

Samsung USB Drivers: Download Here.

Odin 3.07: Download Here.

Triangle Away App For S3 : Download Here.

Procedure To Unroot/Flash Official Rom/Firmware Samsung Galaxy S3 I9300: 

1. First of all you need to install the Traingle Away app from above link.

2. Extract the downloaded files on your desktop.

3. After installing the Triangle Away app on your GS3, launch it and tap the reset flash counter option.

4. After then you device should be rebooted and you’ll have this warning message on your screen. Here you need to Press Volume Up key to reset counter and status on Galaxy S3.

5. Now Press and Hold the Volume Up+Home+Power buttons at the same time to Reboot your Galaxy S3 into Download Mode.

6. After then connect your Galaxy S3 to PC using the USB Cable and Launch Odin on your desktop. At this point make sure Odin recongnizes your device. The ID:COM will either turn blue or yellow and you’ll also see Added!! in the message section of odin.

7. Also note that only Auto Reboot and F. Reset Time should be checked and leave the rest.

8. After then hit the PDA Button in Odin and select the Firmware update file and then hit the START Button.

9. Now wait for Odin to flash the official Fimware file on your Galaxy S3. Once it gets completed, you’ll be notified via the PASS!! message in Odin and during this your device will reboot.

10. Finally now reboot your Galaxy S3 into Stock Recovery using the Volume Up+Home+Power buttons.

11. Now using the Volume Up/Down keys navigate to Wipe Data/Factory Reset and select it using the Power button. After then just confirm the operation by Yes Delete all user data.

12. At last select the Wipe Cache Partition and then Reboot System Now.

That's it, you have successfullu unrooted and flashed stock firmware on your samsung galaxy s3 I9300.

For any questions and suggestions leave a comment below.

By: Unknown On 10:48

Continue Reading

How To Unbrick/Repair/Update/Flash Jelly Bean 4.2.2 On Samsung Galaxy Grand Duos GT-I9082 (Most Easy Method)

Here is the procedure on installing stock Rom on Samsung Galaxy Grand Duos GT-i9082.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desire.
This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.

Image Source:samsung.com

BEFORE YOU START:

1. Install USB Drivers for Samsung Galaxy Grand on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy Grand Duos GT-I9082 by selecting Settings >> About Phone.

NECESSARY DOWNLOADS:

1. Odin: Download Here.

2. Samsung Drivers: Download Here.

3. Jelly Bean Firmware: Download Here.

PROCEDURE TO FLASH JELLYBEAN ON GALAXY GRAND DUOS:

1. Place both the files you’ve downloaded to your Desktop.

2. Unzip files from both the archives over to your Desktop.

3. Double-click on the Odin executable file and it should launch.

4. Click on PDA tab and select the Stock Firmware file you just extracted to your Desktop.

5. Make sure that only Auto Reboot and F. Reset Time boxes are checked in the tool.

6. It’s important that you leave Repartition box unchecked.

7. Power off your device.

8. Reboot your device into Download mode. To do so, just press and hold the Volume DOWN+Home buttons together.

9. Press the Volume Down button to continue to Download mode.

10. Connect your device to your PC using the USB cable.

11. Hit Start button in the tool and it should begin flashing the firmware.

12. Once the firmware’s been flashed, your device will automatically reboot.

13. You’re back to stock now!

For any questions and suggestions leave a comment below.

By: Unknown On 06:54

Continue Reading

Flash Stock Firmware/Rom On Galaxy Y Duos Lite/Pocket Duos GT-S5302

Here is the procedure on installing and flashing stock Rom on GT-S6102.I also tested this on my Galaxy y.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired.

This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.

Image Source:Techdrivein.com

Necessary Downloads:

Stock firmware files  Download Here

Odin flasher for Galaxy Y duos lite Download Here

Driver – Samsung Drivrs or Samsung Kies  Download Here.

USB cable – use the supplied USB cable of your Galaxy Y Duos Lite/Pocket Duos. (Odin will not work Mac and Linux OS).

PC or laptop – running on Windows xp or later OS.

Your Phone – Samsung Galaxy Y Duos Lite GT-S5302

Before You Start:

1. Install USB Drivers for Samsung Galaxy Y Duos Lite on your computer. (Or samsung kies)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer 
Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Y duos Lite should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

Procedure To Update Your Device To Jelly Bean 4.2.1: 

1. First extract the downloaded files on your desktop.

2. Now Reboot your device into Download Mode:

- Turn Off your phone.

- Press and Hold the Volume Down+Home+Power keys all together at the same time for a few seconds.

- Once you see the warning message, then just hit the Volume Up key and you’re done.

3. Next, Run the Odin application on your PC.

4. While in Download Mode, Connect your device to PC via the USB Cable and make sure you’ve successfully installed USB Drivers for your phone on PC.

5.Check that Odin has recognized your device. and the ID:COM port will either turn blue or yellow and you should also see an Added!! in the message section.

6. Also chek that the ‘Auto Reboot‘ and ‘F. Rest Time‘ and rest leave the default Odin settings.

7.Click on the PDA button and browse the Firmware update file.(if available)

8. Similar to that select Phone (modem) ,CSC and pit files if availabe.

9.After selecting the correct file (tar.md5) then hit START button and wait.

10. Finally you need to wait for Odin to completely flash the update file. As it completes, Odin will notify you via the PASS!! Message and your device should automatically reboot.

11. If it does not reboot automatically reboot then go to recovery (vol. up+power+home)  mode and clear cache and wipe data.

That's it you have successfully flashed your samsung galaxy y duos lite/pocket duos 5302.For any questions comment below.

By: Unknown On 20:52

Continue Reading

Flash Stock Firmware And Update Your Galaxy Star Pro S7262 To Official Jelly Bean 4.1.2

Here today , I am going to explain how to repair your bricked phone and update it to official jelly bean 4.1.2.So here is procedure to do that:

Image Source:XDA Forums

Before You Start:

1. Install USB Drivers for Samsung Galaxy Star Pro on your computer. (Or samsung kies)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer 
Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy Star Pro by selecting Settings >> About Phone.

Necessary Downloads:

Android 4.1.2 Jelly Bean XXUAMK2 Firmware Download here.

Samsung USB Drivers Download here

Procedure To Update Your Device To Jelly Bean 4.2.1: 

1. First extract the downloaded files on your desktop.

2. Now Reboot your Galaxy Star into Download Mode:

- Turn Off your phone.

- Press and Hold the Volume Down+Home+Power keys all together at the same time for a few seconds.

- Once you see the warning message, then just hit the Volume Up key and you’re done.

3. Next, Run the Odin application on your PC.

4. While in Download Mode, Connect your Galaxy Star to PC via the USB Cable and make sure you’ve successfully installed USB Drivers for your phone on PC.

5.Check that Odin has recognized your device. and the ID:COM port will either turn blue or yellow and you should also see an Added!! in the message section.

6. Also chek that the ‘Auto Reboot‘ and ‘F. Rest Time‘ and rest leave the default Odin settings.

7.Click on the PDA button and browse the Android 4.1.2 Firmware update file.

8. Similar to that select phone,CSC and pit files if availabe.

9.After selecting the correct file (tar.md5) then hit START button and wait.

10. Finally you need to wait for Odin to completely flash the update file. As it completes, Odin will notify you via the PASS!! Message and your Galaxy Star Pro should automatically reboots.

11. If it does not reboot automatically reboot then go to recovery mode and clear cache and wipe data.

That's it you have successfully updated your device to jelly bean 4.2.1 and unbricked your device.

For any queries leave a comment below.

Recommended:

Root And Install CWM On Galaxy Star Pro.

By: Anonymous On 08:47

Continue Reading

How To Unlock Any HTC Device Bootloader

Unlock Any HTC Device Bootloader

You are here means you know what is bootloader and you want to unlock it for rooting your htc device or installing Clockworkmod on it.So you are on the right place where you will perfectly unlock your htc bootloader without ant problem,so let us start.

image source:HTC Dev

Before You Start:

1. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
2. Make a backup of all your important data before following the guide.(Optional).
3. Ensure the battery of the device is charged more than 80 percent.

Necessary Downloads:

HTC Sync Manager : Download

Actual Procedure To Unlock Bootloader:

1. First of all Download HTC Sync in your Computer
2. Create an account on HTC Dev.com
3. Log in with your account, then go to this page www.htcdev.com/bootloader
4. In the Right Hand side you will get an Option To Select your device, click on it and select your device.
5. Click the “Begin Unlock Bootloader”, then follow the steps given to succeed in unlocking mobile phones.

So you have successfully unlocked bootloader of your htc device.

Supported Devices:

HTC Amaze 4G (Mobilicity)
HTC Amaze 4G (T-mobile)
HTC Amaze 4G (WILD)
HTC Aria 
HTC ChaCha
HTC Design 4G
HTC Desire (GSM/CMDA)
HTC Desire C
HTC Desire C (codename golf U)
HTC Desire HD / Inspire 4G
HTC Desire V
HTC Desire X
HTC Desire Z / T-Mobile G2
HTC Dream / T-Mobile G1 / Era G1
HTC Droid DNA
HTC Droid Eris
HTC Droid Incredible
HTC Droid Incredible 2 ( Verizon)
HTC Desire S (Not sure it will work as there is no information about it in HTCDEV)
HTC Evo 3D (EMEA)
HTC Evo 3D (Rogers)
HTC Evo 3D (Sprint)
HTC Evo 4G+ (Korea Telecom)
HTC Evo Design (Sprint)
HTC Evo view 4G (Sprint)
HTC Flyer (BrightStar)
HTC Flyer (TUR WI-FI)
HTC Flyer (TUR)
HTC Flyer (WWE WI-FI)
HTC Flyer (WWE)
HTC Hero
HTC Incredible S
HTC Jetstream (AT&T)
HTC Legend / A6363
HTC One
HTC One S
HTC One S C2
HTC One V
HTC One VX
AT&T HTC One VX
HTC One X
HTC One X (AT&T) and One XL
HTC One X+
HTC Rezound (Verizon)
HTC Rhyme (Verizon)
HTC Salsa
HTC Sensation (Arabic)
HTC Sensation (Bouygues FRA)
HTC Sensation (EU)
HTC Sensation (SKT Korea)
HTC Sensation (TUR)
HTC Sensation (Vodafone)
HTC Sensation 4G (T-Mobile US)
HTC Thunderbolt (Verizon)
HTC Vivid (AT&T)
HTC Wildfire (A315C)
HTC Wildfire S

Above are tested, more device can be unlocked.

By: Anonymous On 08:15

Continue Reading

How to flash stock firmware/rom on Samsung Galaxy Trend s7392

Flash Samsung Galaxy Trend

Here is the procedure on installing stock Rom on GTs7392-.I also tested this on my Galaxy trend.Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired.

Image Source:samsung.com

This has been also useful for unbricking purposes for a bricked device, reverting back to original stock or if you needed your device warranty back.

Necessary Downloads:

Stock firmware files  Download Here

Odin flasher for Galaxy Trend Download Here

Driver – Samsung Drivrs or Samsung Kies  Download Here.

USB cable   use the supplied USB cable of your Galaxy Y. (Odin will not work Mac and Linux OS).

PC or laptop – running on Windows xp or later OS.

Your Phone – Samsung Galaxy Y Trend.

Before Flashing

Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 80% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset – We often do hard reset before flashing to clean the memory cache of the phone. Master reset code *2767*3855# .

PROCEDURE TO FLASH FIRMWARE:

1. At first, make sure you have installed the drivers correctly by connecting your device.

2.Download the necessary files from the above links.

3. Now, Switch Off your phone completely and start your device into Download Mode by pressing and holding the ‘Volume Down + Home button’ together, and then press the ‘Power button’ till you see the Android Construction logo. Once again press ‘Power Up’ button to confirm.

4. Open “Odin.exe” and connect your phone in download mode itself. If your phone is connected successfully the one of the ID:COM boxes will turn yellow or green in color.

5. Select the files as per below instruction to install Original Stock ROM on Galaxy S Duos. Files are found to be from the extracted folder.

• Click on “PDA” and select file with “CODE” in its name.
• Click on “Phone” and select file with “MODEM” in its name. (Note: Ignore this step if you don’t able to find such file)
• Click on “CSC” and select file with “CSC” in its name. (Note: Ignore this step if you don’t able to find such file)
• Click on “PIT” and select “.pit” file. (Note: Ignore this step if you don’t able to find such file)

6. Please make sure that F. Reset Time and Auto Reboot options are checked on Odin.

7. Now, click on the “Start button” on Odin to start the installation process. Installation will take a few minutes to complete, so please wait for the complete process.

8. Finally, when the installation process is completed successfully you will see the “PASS” message on Odin and then your device will reboot automatically. Now, you can disconnect your device from the computer.

For any questions comment below.

By: Anonymous On 08:52

Continue Reading